28-Piece Hammer Set

The tips are held by a magnet instead of a thread, so you swap them without unscrewing. The 5-piece set has five stainless steel tip shapes, from crown reduction to flat blending.

Sharp precision points, standard domed tips, wide flat heads and wedge shapes. The surfaces are hand-polished for tapping on clear coat.

Its curved, dotted face grips and slightly shrinks the metal on impact and resists slipping, which helps on complex blending. The magnetic square handle stops it rolling off the cart.

A slap tool is for broad surface adjustments and leveling. The magnetic wooden set pairs a slap tool with a magnetic wooden pen for detailed knockdown work.

Knocking back micro-highs and crowns without marking the clear coat. It measures 17 x 100 mm and is used on both steel and aluminum panels.

Most threaded knockdowns and tips here come in M8 (Metric 8) or 5/16 inch. Choose the thread that matches your existing tips; the tip adapter converts between the two.

Choose the aluminum head for delicate blending and soft, controlled corrections. Choose the steel head for stiff, deep or sharp dents and high-strength steel panels. The hammer weighs about 500 g.

The DentPDR medium-weight balance hammer and the Blending Hammer - PDR both weigh 170 g, and the ergonomic wood handle hammer weighs about 500 g.

Both have a lightweight carbon fiber handle that reduces vibration and a stainless steel body. One takes interchangeable tips so you can change the striking face; the other has a fixed stainless steel head.

A plastic striking face gives a softer impact than steel, which is more forgiving on small and medium dents. Choose the Model 6 plastic face hammer, or the plastic hammer with a 10-piece bit set.

The PDR knockdown striking hammer has a 40 mm face and a 32 cm length. The wide face makes it hard to miss the back of the pen, so you can keep your eyes on the dent.

The PDR ultra-precision magnetic knockdown pen has a 3 mm steel trace point for micro-highs, sharp tension points and small over-pulls.

Three sets. A 9-piece stainless steel tip set in M8 or 5/16 (500 g total), a 12-piece M8 stainless steel tip set in a storage box, and an 11-piece knockdown pen set with an aluminum body and stainless steel tips.

Aluminum keeps the pen light, which reduces hand fatigue over long blending sessions. The ultra-light aluminum knockdown adds a textured body and O-rings for grip; both come in M8 or 5/16.

They range from 13 to 16 cm in length and 12 to 23 mm in diameter. For example, the Strike Pen and Edge Pen are 13 cm x 17 mm and the Pro Pen is 16 cm x 23 mm.

Yes, on the 2-piece stainless steel knockdown hammer set. Each hammer has an interchangeable tip socket for plastic, steel or rubber tips, in M8 or 5/16.

Both offer similar flexibility and hardness. Stainless rods are lower maintenance; uncoated spring steel can surface-rust over time unless you wipe it down with a light protective oil such as WD-40. If you want zero upkeep, go stainless.

They are designed for professional PDR technicians, but trainees and newly qualified users work with the same range. Tell us your level and we will point you to the right starting set.

Every order is picked and dispatched from our own warehouse and shipped with tracked international carriers such as UPS, DHL, and FedEx through our logistics partner.

You receive a tracking number by email as soon as your order is dispatched. Use it on the carrier's site, or send us your order number and we will check it for you.

Orders above a cart threshold ship free. The exact threshold for your country is shown in the cart and at checkout.

We ship to more than 80 countries, including the United States, Canada, Mexico, the United Kingdom, the EU, the Middle East, Africa, and Central Asia. If checkout does not offer your country, message us and we will check a route.

Orders ship with express carriers, so international transit is typically a few business days depending on the destination. You receive the tracking number as soon as your order leaves the warehouse.

Depending on the destination country, international shipments may be subject to local import duties, customs fees, or taxes. These are set and collected by your country's customs authority, not by us.

DentPDR tools carry a 1-year warranty. The PDR Steel Hammer DM, a 40 cm steel hammer, also states a 1-year guarantee on its product page.

Yes. DentPDR offers a 30-day free exchange, so you can swap M8 for 5/16 or the other way round. Contact us with your order number before you send anything back. See shipping and returns.

Every tool carries a 1-year warranty against manufacturing defects, and you can exchange a product free of charge within 30 days of delivery, alongside your statutory rights. See our shipping and returns policy for the steps.

Our tools are manufactured in our own facility from stainless steel and special spring steels, and every order is dispatched from our own warehouse.

For larger orders, custom sizes and custom production can be arranged. Contact us with the geometry and quantities you need.

Yes. Choose the Wholesale topic in the form, or message us on WhatsApp with your company details and the products you are interested in.