Global PDR Best Sellers

Their hook curvature gives leverage behind door skins, deep roof rails and internal pillars where straight rods cannot reach. The set has 10 rods in 6, 8 and 10 mm diameters.

The two-piece rods are easier to transport and maneuver, while the one-piece rods give more stability and pushing force. Having both covers rough corrections and fine finishing.

A 3-piece set of 8 mm rods with ratchet handles. It has a 35 cm rod and 45 cm rods in two bend variations, and each 360 degree ratchet handle lets you change grip angle without taking the tool out of the access hole.

Large dents and hail damage. Its 40 mm whale tail tip spreads pressure across the panel, and the six lengths from 15 to 90 cm work with a 360 degree rotating adjustable arm inside doors, fenders and roofs.

Fine blending, softening transition lines and detailed finish work. It has a mirror-polished stainless steel head and a natural hardwood handle shaped so it does not rotate in the hand.

It stretch-pulls the metal outward through a glue connection. The head turns through 180 degrees, the body is aluminum, and it comes with 3 tension blocks: wide for large areas, high-force for deep dents and narrow for tight creases.

The adjustable height rod and tackle stand holds your rods and equipment at a working height you set. The accordion body carrying stand holds panels in open or closed positions and folds for mobile work.

The Tiran, Bursa, Kars, Navoris, Amasya and Bayburt sets come in White Spring Steel or Stainless Steel; the stainless version is AISI 630 (17-4 PH).

Four complete rod sets. Tiran Edition (29 rods with 360 degree rotatable handles and a tool bag), Bursa Edition (16 rods with a carry bag), Kars Edition (10 question-mark rods) and Navoris Edition (10 single bend rods in left and right).

Tiran has 29 rods with 360 degree rotatable handles and a custom tool bag. Bursa has 16 rods from 45 to 90 cm in 6 to 10 mm diameters, each labeled and color-coded, with a heavy-duty carry bag.

Five sizes, each in a left and a right version. They are 5 mm x 20 cm, 5 mm x 30 cm, 6 mm x 40 cm, 6 mm x 45 cm and 8 mm x 60 cm, all with a sharp tip and a single bend.

Choose 100 cm for reach across large panels and 60 cm for more controlled handling in tighter areas. Both work with hot melt and cold glue pulling systems.

Heavy pulling on collision dents and deep creases with glue tabs. It is heavy-duty steel with a non-slip grip, and its 57 cm length suits a wide range of heavy pulling tasks.

The 57 cm slide hammer and the 60 or 100 cm dent tension kit are glue pulling tools. The rod sets, whale tail set and blending hammer are for pushing and finishing.

Four sets. The Tiran and Bursa Editions have 360 degree rotating handles, the Amasya Edition a 360 degree rotatable ratchet handle, and the Bayburt whale tail set a 360 degree rotating adjustable arm.

Both offer similar flexibility and hardness. Stainless rods are lower maintenance; uncoated spring steel can surface-rust over time unless you wipe it down with a light protective oil such as WD-40. If you want zero upkeep, go stainless.

They are designed for professional PDR technicians, but trainees and newly qualified users work with the same range. Tell us your level and we will point you to the right starting set.

Each rod in the Bursa Edition is labeled and color-coded, so you can pick the right diameter and length quickly during a repair.

Every order is picked and dispatched from our warehouse in Bursa, Turkey, and shipped with tracked international carriers such as UPS, DHL, and FedEx through our logistics partner.

You receive a tracking number by email as soon as your order is dispatched. Use it on the carrier's site, or send us your order number and we will check it for you.

Orders above a cart threshold ship free. The exact threshold for your country is shown in the cart and at checkout.

We ship to more than 80 countries, including the United States, Canada, Mexico, the United Kingdom, the EU, the Middle East, Africa, and Central Asia. If checkout does not offer your country, message us and we will check a route.

Orders ship with express carriers, so international transit is typically a few business days depending on the destination. You receive the tracking number as soon as your order leaves the warehouse.

Depending on the destination country, international shipments may be subject to local import duties, customs fees, or taxes. These are set and collected by your country's customs authority, not by us.

Yes. DentPDR offers a 30-day free exchange. Contact us with your order number before you send anything back. See shipping and returns.

Yes. You can pay with PayPal, and PayPal payments carry PayPal's 180-day buyer protection. See shipping and returns.

Every tool carries a 1-year warranty against manufacturing defects, and you can exchange a product free of charge within 30 days of delivery, alongside your statutory rights. See our shipping and returns policy for the steps.

Our tools are manufactured in Türkiye from stainless steel and special spring steels, and every order is dispatched from our own warehouse in Bursa.

For larger orders, custom sizes and custom production can be arranged. Contact us with the geometry and quantities you need.

Yes. Choose the Wholesale topic in the form, or message us on WhatsApp with your company details and the products you are interested in.