PRO KITS / Complete Solutions

Pro Kits group Edition rod and whale tail sets, complete sets from a 25-piece starter set to a 140-piece set, and the Teheran Edition dual-ended stick.

The set combines rods, whale tails, pens and a glue gun. It lists a 3-piece Istanbul set (50 to 70 cm, 8 to 12 mm), 4 adjustable handle rods (45 to 70 cm, 8 mm), a 90 cm M8 interchangeable tip double bend rod, a 4-piece whale tail set, two pens and a variable temperature silicone gun.

The set adds a stand and a light to a rod kit. It lists a PDR stand, a 6-LED lamp (3 yellow, 3 white), a 7-piece whale tail set (10 to 110 cm, 3 cm tip), a 7-piece rod set, the 6-piece Ulubey set, 2 special curve adjustable handle rods and a 120 cm M8 interchangeable tip T-rod.

It combines several rod groups. It lists a 6-piece Ulubey set, a 4-piece rod set, a 35.4 inch M8 interchangeable tip rod, 4 short-end and 4 long-end rods from 10 to 25.6 inches, and 2 more rods of 10 and 13.8 inches.

The 62 Pcs Complete Set includes 15 adjustable handle pieces. It is AISI 630 stainless steel and is meant for both large panels and tight, hard-to-reach areas.

The Tiran Edition 29-piece set ships with a custom tool bag, and the Bursa Edition 16-piece set also comes with a bag. Both use 360-degree rotating rods.

It is a handmade 75 cm PDR stick made from recycled car scissor spring steel. Both ends accept interchangeable tips, and it is listed for deep fender dents and wheel arches.

Kassel is a 10-piece set of 360-degree rotating rods in 5 sizes, each with a left and a right bend, and a modular, detachable handle system. It comes in White Spring Steel or AISI 630 stainless.

Bursa is a 16-piece set of custom-sized 360-degree rotating rods with a range of shaft diameters, lengths and tip designs, supplied with a bag. It comes in White Spring Steel or AISI 630 stainless.

It combines many tool types in AISI 630 stainless steel. The listing names rod styles, handle configurations, special bends, whale tails, interchangeable tip tools and precision rods for hail damage, door dings, body lines, fenders, roofs and hoods.

Three kits are named as starter sets: the 25 Pieces Starter Rod Set, the 28 Pieces Beginner Set and the 40 Pieces Complete Starter Set. Their listings give AISI 630 stainless steel as the material.

It is an 11-piece 6 mm set with 8 left and right double-bend rods for tight areas behind door skins, pillars and fender edges. Lengths run from 5 cm to 45 cm.

The Elvora 6-piece set has sharp tips for finishing work on micro-highs, with shafts from 5 to 12 mm. The Navoris 10-piece set gives five single bend sizes in left and right versions, also with sharp tips.

Sedona is a 4-piece 360-degree rotating whale tail set from 30 to 90 cm with a question-mark tip 10 mm wide. Sibiu is a 6-piece flat whale tail set with a 40 mm tip, from 10 to 85 cm.

Yes. Edition kits such as Bursa, Elvora, Kassel, Manisa, Navoris, Sedona, Sibiu and Tiran let you choose White Spring Steel or Stainless Steel, which is AISI 630 (17-4 PH).

Bursa (16 pieces), Kassel (10) and Tiran (29) use 360-degree rotating rods, and the Sedona whale tail set has 360-degree rotating handles. The 62-piece set includes 15 adjustable handle pieces.

Both offer similar flexibility and hardness. Stainless rods are lower maintenance; uncoated spring steel can surface-rust over time unless you wipe it down with a light protective oil such as WD-40. If you want zero upkeep, go stainless.

They are designed for professional PDR technicians, but trainees and newly qualified users work with the same range. Tell us your level and we will point you to the right starting set.

Every order is picked and dispatched from our warehouse in Bursa, Turkey, and shipped with tracked international carriers such as UPS, DHL, and FedEx through our logistics partner.

You receive a tracking number by email as soon as your order is dispatched. Use it on the carrier's site, or send us your order number and we will check it for you.

Orders above a cart threshold ship free. The exact threshold for your country is shown in the cart and at checkout.

We ship to more than 80 countries, including the United States, Canada, Mexico, the United Kingdom, the EU, the Middle East, Africa, and Central Asia. If checkout does not offer your country, message us and we will check a route.

Orders ship with express carriers, so international transit is typically a few business days depending on the destination. You receive the tracking number as soon as your order leaves the warehouse.

Depending on the destination country, international shipments may be subject to local import duties, customs fees, or taxes. These are set and collected by your country's customs authority, not by us.

Yes. DentPDR offers a 30-day free exchange, so you can swap it for a different kit. See shipping and returns.

Yes. You can pay with PayPal, and PayPal purchases come with 180-day buyer protection. See shipping and returns.

Every tool carries a 1-year warranty against manufacturing defects, and you can exchange a product free of charge within 30 days of delivery, alongside your statutory rights. See our shipping and returns policy for the steps.

Our tools are manufactured in Türkiye from stainless steel and special spring steels, and every order is dispatched from our own warehouse in Bursa.

For larger orders, custom sizes and custom production can be arranged. Contact us with the geometry and quantities you need.

Yes. Choose the Wholesale topic in the form, or message us on WhatsApp with your company details and the products you are interested in.